# 1

McErer 2017-12-27 16:04编辑

大家好,

在使用了我的新Cetus MkII几天之后，我终于找到了一些对Slic3r有用的设置。< / p >< p >棘手的部分:

当我开始寻找正确的设置，我第一次遇到的问题，我写的每一个g代码试图移动x轴的限制。删除额外的“G28”(home命令)后，一切都运行良好。额外的home似乎没有必要，因为无论如何打印机在启动后都必须初始化。< / p >< p >我的z偏移距打印床0.2mm。为了保证喷嘴不会撞到床上，我手动编写了一些g-code，将喷嘴移动到四个角，慢慢接近床上的0.5mm，然后用塞尺测量喷嘴和床之间的间隙。为了读取实际值，我使用了cetus程序中的校准功能。< / p >< p >我打印了筏的第一层350%的厚度，以缩小喷嘴和床之间的差距。最初的想法是把稍微不平整的床弄平。< / p >< p >< / p >< p >我的设置远远不够理想，这只是第一步，使用这个惊人的小打印机在它的全部潜力眨眼:

在这里(https://imgur.com/gallery/96kEe)您可以看到使用Cetus切片器的打印结果与使用我的设置在Slic3r中生成的g代码之间的比较。< / p >< p >< / p >< p >问候,< / p >< p >McErer< / p >< p >< / p >< p >config.zip

# 2

你好,< / p >< p >

谢谢你提供的信息。基本问题，你如何得到文件生成到打印机?

# 3

在Slic3r中导出g-code(从“plater”选项卡)，在Cetus3D中只添加生成的文件。只需像处理.stl文件那样添加它。

# 4

你好，谢谢你的分享。这对我来说很好，但是我必须将第一层挤压宽度的设置从200%更改为120%Slic3r手册< / p >< / p >

# 5

< p >< / p >< / p >

# 6

谢谢你的切片机信息。这台机器不能通过wifi模拟octoprint，所以如果我想通过网络运行slic3r，就必须在它的前端使用Pi。< / p >

# 7

如果有人感兴趣的话。这是我最后的配置:< / p >

#由Slic3r 1.2.9孙2018年5月6日21:52:40 avoid_crossing_perimeters = 0 x0 bed_shape = -180, 0 x0, 0 x180 -180 x180 bed_temperature = 0 before_layer_gcode = bottom_solid_layers = 8 bridge_acceleration = 0 bridge_fan_speed = 100 bridge_flow_ratio = 1 bridge_speed = 60 brim_width = 10 complete_objects冷却= 1 = 1 default_acceleration = 0 disable_fan_first_layers = 3 dont_support_bridges = 1 duplicate_distance = 6 end_gcode = M109;关闭挤出机\nG0 Z-2;\nG0 X-178 Y2;\nM2;计划年底external_fill_pattern =直线external_perimeter_extrusion_width external_perimeters_first = 0 = 0 external_perimeter_speed = 50% extra_perimeters = 1 extruder_clearance_height = 20 extruder_clearance_radius = 20 extruder_offset = 0 x0 extrusion_axis = E extrusion_multiplier = 24 extrusion_width = 0.48 fan_always_on = 0 60 filament_colour fan_below_layer_time = = # FFFFFF filament_diameter = 1.75 fill_angle = 45 fill_density = 15% fill_pattern =蜂窝first_layer_acceleration = 0 first_layer_bed_temperature = 0 first_layer_extrusion_width = 0 first_layer_height = 0.2 first_layer_speed = 15 first_layer_temperature = 230 gap_fill_speed = 20 gcode_arcs = 0 gcode_comments reprap infill_acceleration = 0 = 0 gcode_flavor = infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 15% infill_speed = 60 interface_shells = 0 layer_gcode = layer_height = 0.2 max_fan_speed = 100max_print_speed = 80 max_volumetric_speed = 0 min_fan_speed = 35 min_print_speed = 10 min_skirt_length = 0 notes = nozzle_diameter = 0.4 octoprint_apikey = octoprint_host = only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 perimeter_speed = 35 perimeters = 4 post_process = pressure_advance = 0 raft_layers = 0 resolution = 0 retract_before_travel = 2 retract_layer_change = 0 retract_length = 10 retract_length_toolchange = 10 retract_lift = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 40 seam_position = aligned skirt_distance = 20 skirt_height = 1 skirts = 1 slowdown_below_layer_time = 5 small_perimeter_speed = 15 solid_infill_below_area = 70 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0 solid_infill_speed = 20 spiral_vase = 0 standby_temperature_delta = -5 start_gcode = M204 P1500 ; set acceleration\nG1 Z-2;\nG0 X-90 Y90; support_material = 0 support_material_angle = 0 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = pillars support_material_spacing = 4 support_material_speed = 60 support_material_threshold = 0 temperature = 230 thin_walls = 1 threads = 2 toolchange_gcode = top_infill_extrusion_width = 0 top_solid_infill_speed = 15 top_solid_layers = 8 travel_speed = 130 use_firmware_retraction = 0 use_relative_e_distances = 0 use_volumetric_e = 0 vibration_limit = 0 wipe = 0 xy_size_compensation = 0 z_offset = -179.6
# 8

我无法下载你的config.zip文件，因为链接断了。它发出这样的信息:“哎呀!这个页面不存在，或者是私有的。”< / p >

# 9

config.zip(2.1 KB)
这是我的当前配置。不要忘记调整z偏移!眨眼:

1像