我现在拥有其中两个打印机。大约一个月前，我遇到了一个小问题，CETUS支持在几个小时内从CETUS3D应用程序（右上角的图标）中回应了我的反馈请求。我直接收到了Jason Wu的电子邮件，然后收到了来自Cecelia的人的后续电子邮件。出色的客户服务。除此之外，我没有任何问题。我的打印机每天运行近24小时。没有磨损的迹象。线性导轨使其非常准确。这是一个非常简单的设计，因此没有什么可以出错的。我购买了扩展的Z轴和可选的加热床。 The Cetus application prints a little slow, but I use Simplify3D (G-Code) for quick prototype prints, and then go back to the Cetus application for finished - near perfect prints. I cannot get Simplify3D to print as well as the Cetus application, but it may be my settings. Just be careful to set the Z axis setting (in the G-Code tab) before printing, or the nozzle will hit the bed. Also, read the documentation on making changes to the Simplify3D Scripts tab (some of the Simplify3D G-Codes are not used). I have only printed with PLA and PETG. The PETG warps a little, even with the heated bed. I clipped the coated bed on top of the heated bed, and only turn it on to get the first layers to stick. I don’t use any other adhesive (tape or tack). I have not received anything from Cetus for this post, but I will probably purchase another Cetus in the near future. I can certainly recommend it - partly because it is a great printer, and partly because of their customer service.
